Digital Pre-Amplifier

mObridge M1000-M-DA3

The mObridge Digital and Analog Pre-amplifiers provide a connection between the MOST system in the vehicle with any aftermarket digital or analog amplifier.

request product find a merchant
  • description

    The mObridge Digital and Analog Pre-amplifiers provide a connection between the MOST system in the vehicle with any aftermarket digital or analog amplifier.
    The DA series can provide 8 channels of RCA analog outputs, digital Toslink output and an amplifier turn on/off control. Full retention of the factory controls is supported - control Volume, Balance, Fader, and
    Equalizer (where applicable). There is no need for an external mounted controller or volume knob. The DA3 adds a full graphical interface for complete control of the DSP

    • Vehicle-side input
      MOST plastic optical fiber (25MHz) (harness included)
      Power/Ground connection (harness included)
    • Analog outputs
      8 channels RCA full-range.
      4V RMS
      192kHz Sampling 24-bit digital to analog converter (DAC)
    • Vehicle interface
      Support for volume/fade/balance on factory radio and/or steering wheel.
      Support for all factory-fitted audio sources (eg telephone/navigation/voice recognition/television/dvd) (where applicable).
      Support for reverse park sensor audio overlay (where applicable).
      Support for factory multi-band equalizer (where applicable).
      Subwoofer gain control from the factory radio
      Ability to trigger different presets using the 'Surround' modes from the vehicle radio
    • Amplifier control
      12-volt amplifier turn on/off signal.
  • specifications
    Output 8 x RCA & Toslink
    User Interface yes
    Channel Mapping yes
    Subwoofer Control yes

     

    Overall Dimensions
    Metric 120 x 108 x 32mm
    Standard 4.6” x 4.25” x 1.25”

    Configuration
    Vehicle Reconfigurable = Yes
    Firmware Updatable = Yes
    Update/Reconfig Method = Mini-USB

    Wiring Colours
    Black = Ground (-)
    Red Constant = 12 volts (+)
    White = Bypass Switch (pre-wired)
    Blue = Remote Amp Turn On (Only to be connected to the mObridge Digital / Analog Pre-Amp (M1000-M-DA Series))

    PORSCHEYAZ
    The PORSCHEYAZ is designed for Porsche vehicles with a Yazaki-type connector. Typical installation is in early model Porsche vehicles, 2003-2005 model year. The only way to identify which optical system is in the vehicle is by visual inspection.

  • shipment
    • ECU
    • Optical Cable Connection
    • Power Loom
    • User Manual
    • MOST Installation Guide
Technical changes and errors excepted.